Adjusting Margins Of Image Printing - Kyocera KM-2540 Service Manual

Maintenance
item No.

Adjusting margins of image printing

U402
Description
Adjusts margins for image printing.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
Display
LEAD
A
C
TRAIL
TRAIL(DUP)
TRIAL(MP)
3. Press the interrupt key.
4. Press the start key to output a test pattern.
5. Press the interrupt key.
6. Change the setting value using the cursor up/down keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U402
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Printer leading edge margin
Printer left margin
Printer right margin
Printer trailing edge margin
Printer trailing edge margin in duplex
mode (second side)
Printer trailing edge margin (MP tray)
Printer leading edge margin
(3.0±2.5 mm)
Printer
left margin
+2.0
(2.0 mm)
–1.5
Printer trailing edge margin
(3.0±2.5 mm)
U403 U404
(P.1-3-56) (P.1-3-57)
Description
Setting
range
0 to 10.0
-3.4 to 10.0
-3.4 to 10.0
-5.0 to 10.0
-5.0 to 10.0
-5.0 to 10.0
Printer
right margin
+2.0
(2.0 mm)
–1.5
Figure 1-3-16
2JB/2JC
Initial Change in
setting value per step
3.0 0.1 mm
3.0 0.1 mm
3.0 0.1 mm
4.0 0.1 mm
6.5 0.1 mm
4.6 0.1 mm
1-3-55