Chart Of Image Adjustment Procedures - Kyocera KM-2540 Service Manual

Chart of image adjustment procedures

Adjusting
Item
order
Adjusting the magnification in the
main scanning direction (printing
1 adjustment)
Adjusting the magnification in the
auxiliary scanning direction (print-
2 ing adjustment)
Adjusting the center line (printing
adjustment)
3
Adjusting the center line of the cas-
settes and paper feeder (printing
4 adjustment)
Adjusting the leading edge registra-
tion (printing adjustment)
5
Adjusting the leading edge margin
(printing adjustment)
6
Adjusting the trailing edge margin
(printing adjustment)
7
Adjusting the left and right margins
(printing adjustment)
8
Adjusting magnification of the
scanner in the main scanning direc-
9 tion (scanning adjustment)
Adjusting magnification of the
scanner in the auxiliary scanning
10 direction (scanning adjustment)
Image Description
Polygon motor speed adjustment
Drive motor speed adjustment
Adjusting the LSU print start timing
Adjusting the position of the rack adjuster
Registration clutch turning on timing
(secondary paper feed start timing)
LSU illumination start timing
LSU illumination end timing
LSU illumination start/end timing
Data processing
Original scanning speed
Maintenance mode
Original
Item No. Mode
U053 POLYGON MOTOR U053 test pattern
U053 MAIN MOTOR U053 test pattern
U034 LSU OUT LEFT U034 test pattern
U034 LSU OUT LEFT U034 test pattern
U034 LSU OUT TOP U034 test pattern
U402 LESD U402 test pattern
U402 TRAIL U402 test pattern
TRAIL(DUP)
TRAIL(MP)
U402 A U402 test pattern
C
U065 MAIN SCAN ADJ Test chart
U065 SUB SCAN ADJ Test chart
U070 MAIN ADJ/SUB ADJ
Page Remarks
P.1-3-16
P.1-3-16
P.1-3-13
- Adjusts the position of each paper source.
P.1-3-12
P.1-3-55
P.1-3-55 To make an adjustment for duplex copying, select
TRAIL(DUP).
To make an adjustment for MP tray, select
TRAIL(MP).
P.1-3-55
P.1-3-18
P.1-3-18 U065: For copying an original placed on
the platen.
P.1-3-22 U070: For copying originals from the DP.
2JB/2JC
2-4-7