Kyocera KM-2540 Service Manual page 111

Setting low-power timer timeout
Set the time until Auto Low-Power mode is activated.
1. Select [Low power mode chng. time] using the cur-
sor up/down keys and press [Change #].
2. Press [+] or [-] to set the time until Auto Low-Power
Setting auto clear timeout time
Set the time until Auto Clear is activated after the last
operation when [On] is selected in Activating Auto Clear.
1. Select [Auto Clear Time Setting] using the cursor
up/down keys and press [Change #].
2. Press [+] or [-] to set the time until Auto Clear is
activated.
Selecting output destination
Set the default copy output destination.
This setting is displayed when the optional document fin-
isher, job separator or built-in finisher is installed.
1. Select [Select Copy output tray] using the cursor
up/down keys and press [Change #].
2. Select the output destination.
Selecting FAX output mode
Set the default output destination for printing originals or
reports received by fax.
This setting is displayed when the fax kit and document
finisher optional job separator or built-in finisher is
installed.
1. Select [Select FAX output tray] using the cursor up/
down keys and press [Change #].
2. Select the output destination.
Select the main mode
Specify the screen to be first shown after power-on.
This setting is displayed when the optional fax kit is
installed.
1. Select [Select the main mode] ([Select main mode])
using the cursor up/down keys and press [Change
#].
2. Select [Copy Mode] or [FAX Mode].
Setting notification sounds
Set the notification sounds made by the machine during
operation.
1. Select [Notify (Touch tone)], [Notify (Finish)], [Notify
(Ready)] or [Notify (Attention)] using the cursor up/
down keys and press [Change #].
2. Select [Off] or [On].
Silent mode
Configures the machine to operate more quietly.
1. Select [Silent Mode] using the cursor up/down keys
and press [Change #].
2. Select [Off] or [On].
Changing management code
Change the machine's management code.
The default setting is 2500 for the 25 ppm model and
3000 for the 30 ppm models.
1. Select [Management code change] ([Change
MGMT code with #]) using the cursor up/down keys
and press [Change #].
2. Use the numeric keys to enter the new manage-
ment code.
Activating auto sleep
In Auto Sleep mode, the machine automatically switches
to Sleep mode if left idle for a preset period.
1. Select [Auto sleep] using the cursor up/down keys
and press [Change #].
2. Select [Off] or [On].
Auto drum refresh
Specify the duration of automatic drum refreshing.
1. Select [Auto Drum Refresh] using the cursor up/
down keys and press [Change #].
2. Select [Off], [Standard] or [Long].
2JB/2JC
1-3-77