Detaching And Refitting The Fuser Thermistor 1 - Kyocera KM-2540 Service Manual
Hide thumbs
Also See for KM-2540:
- Operation manual (208 pages) ,
- Advanced operation manual (136 pages) ,
- Service manual (90 pages)
Table of Contents
Advertisement
2JB/2JC-1
(6) Detaching and refitting the fuser thermistor 1
Follow the procedure below to replace the fuser thermistor 1.
Procedure
1. Remove the heat roller (see page 1-5-49).
2. Remove the screw and remove the fuser
thermistor 1.
3. Replace the fuser thermistor 1 and install
the thermistor.
4. Refit all the removed parts.
1-5-50
Screw
Fuser thermistor 1
Figure 1-5-91
Advertisement
Table of Contents
