Displaying The Rom Version; Initializing All Data - Kyocera KM-2540 Service Manual

2JB/2JC
Maintenance
item No.

Displaying the ROM version

U019
Description
Displays the part number of the ROM fitted to each PWB.
Purpose
To check the part number or to decide, if the newest version of ROM is installed.
Method
1. Press the start key. The ROM version are displayed.
2. Change the screen using the * or # keys.
Display
MAIN
MAIN BOOT
ENGINE
ENGINE BOOT
LANGUAGE
OPTION LANGUAGE
DICTIONARY
PRINTER
DP
OPTION CASSETTE
INNER DF
SIMPLE DF MAIN
ENGINE POWER
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Initializing all data

U020
Description
Initializes all the backup RAM on the main PWB to return to the original settings.
Refer to *1 of the maintenance mode item list about the item initialized.
Reset each intialized mode based on an own-status report U000 printed at installing the machine.
Purpose
To be executed as required.
Method
1. Press the start key.
2. Press [INCH].
3. Press the start key. All data in the backup memory is initialized and the default setting for the inch spec-
ifications is registered.
4. Turn the main power switch off and on.
1-3-8
Description
Description
Main PWB ROM IC
Main PWB booting
Engine PWB ROM IC
Engine PWB booting
Standard language ROM IC
Optional language ROM IC
-
Optional printer board ROM IC
Optional DP main PWB ROM IC
Optional paper feeder main PWB ROM IC
Optional built-in finisher main PWB ROM IC
Optional document finisher main PWB ROM IC
Engine power CPU