2JB/2JC
(5) Setting MP tray
Auto detect
The paper size is automatically detected.
1. Press [Auto Detection].
2. Select [Centimeter] ([Centimetre]) or [Inch].
Other standard sizes
Specify special standard sizes.
1. Press [Others Standard] and press [Select size].
2. Select the paper size.
3. Press [Close].
Size entry
Specify the required paper size.
1. Press [Size Entry].
2. Press [+] and [-] to set the [Y] (height) size.
Metric models only
Enter the size directly using the numeric keys by
pressing [#-Keys].
3. Press [+] and [-] to set the [X] (width) size.
Metric models only
Enter the size directly using the numeric keys by
pressing [#-Keys].
Custom size
Store frequently used paper sizes (1 - 4) as custom sizes.
1. Press [Others Standard] and press [Select size].
2. Select the paper size from [Custom Size] ([Use reg-
ist]).
3. Press [Close].
Specifying the media type for the MP tray
1. Press [Select Media Type].
2. Select the media type.
3. Press [Close].
(6) Registering non-standard sizes for originals
Pre-register 4 types of non-standard original sizes.
1. Select the number to register from [Original Size
(custom 1 - 4)] and press [Change #].
2. Press [On].
3. Press [+] or [-] to set the Y (height) size.
4. Press [+] or [-] to set the X (width) size.
5. Press [Close]
(7) Drum refresh
Drum refresh
Refresh the drum when printed images are blurred or
white spots appear on the image.
1. Press [Drum refresh].
2. Select [Drum Refresh 1] or [Drum Refresh 2].
Drum refresh begins.
3. Press [Close].
1-3-78
(8) Printing reports
Print the following reports from the operation panel.
• Copy Status Report
• Machine Status Report
• Toner Coverage Report
The toner coverage report includes for each paper size
details about the number of sheets printed and black cov-
erage ratio. Print the following 4 report types.
• Total toner coverage report
• Copy toner coverage report
• Printer toner coverage report
• Fax toner coverage report
Before printing reports, verify that either 11 x 8
paper is loaded into a cassette.
1. Press the key for the report you would like to print.
2. Report printing begins.
(9) Checking total copy count
Check the total copy count from the operation panel.
Check the following values.
• Number of copies, number of prints, number of faxes,
and total of all of these
• Number of original pages scanned for copy mode and
fax send mode, and total of all of these
Also, print this information as a counter report.
Before printing reports, verify that either 11 x 8
paper is loaded into a cassette.
1. The counts are displayed on the touch panel.
2. To print a counter report, press [Print Report].
" or A4
1/2
" or A4
1/2