Setting The Black Line Cleaning Indication; Setting The Size Conversion Factor - Kyocera KM-2540 Service Manual

Maintenance
item No.

Setting the black line cleaning indication

U326
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the platen when scanning from the DP.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
COUNT
Initial setting: ON
3. Press the start key. The setting is set.
Setting the count value
1. Enter a count using the cursor up/down keys.
Setting range: 0 to 999
Initial setting: 8
When setting is 0, the black line cleaning indication is displayed only if the black line is detected.
2. Press the start key. The count is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Setting the size conversion factor

U332
Description
Sets the coefficient of nonstandard sizes in relation to the A4/11" x 8
to convert the black ratio in relation to the A4/11" x 8
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/11" x 8
for copying printing and fax respectively.
Setting
1. Press the start key.
2. Select copying (COPY), printing (PRT) or fax (FAX).
3. Change the setting using the cursor up/down keys.
Display
COPY
PRT
FAX
4. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Displays the cleaning guidance
Not to display the cleaning guidance
Setting counts of the cleaning guidance indication
Description
Size parameter for copying
Size parameter for printing
Size parameter for fax
" size. The coefficient set here is used
1/2
" size and to display the result in user simulation.
1/2
Setting range
0.1 to 3.0
0.1 to 3.0
0.1 to 3.0
2JB/2JC
" size
1/2
Default setting
1.0
1.0
1.0
1-3-51