Setting Backup Data Reading/Writing - Kyocera KM-2540 Service Manual

Hide thumbs Also See for KM-2540:
Table of Contents

Advertisement

2JB/2JC-2
Maintenance
item No.

Setting backup data reading/writing

U917
Description
Stores backup data from the fax control PWB (when an optional fax kit is installed) into CompactFlash or
reads the data from CompactFlash.
Purpose
To store and write data when replacing the PWB.
Setting
1. Press the power key on the operation panel, and after verifying the power indicator has gone off, switch
off the main power switch.
2. Remove two screws and remove the right upper plate lid.
3. Insert Compact Flash in a notch hole of the machine.
4. While pressing the copier key, turn the main power switch on.
5. Enter the maintenance item.
6. Press the start key.
7. Select the item.
Display
SRAM -> CF : FAX BACKUP
CF -> SRAM : FAX BACKUP
SRAM -> CF : FAX DIAL INFO
CF -> SRAM : FAX DIAL INFO
8. Press the start key. Reading or writing is executed, and the screen displays the result.
If the operation was successful:
EXECUTE 0100
CHECK SUM ****
CODE 0000
If the operation failed:
EXECUTE 0100
CHECK SUM ****
CODE XXXX
Where XXX is the error code indicating the reason for the failure.
See Error Codes for Operation U917 and U926 below.
9. Press the power key on the operation panel, and after verifying the power indicator has gone off, switch
off the main power switch.
10. Remove the Compact Flash from the machine.
11. Refit the right upper plate lid.
Error Codes for Operation U917 and U926
1-3-64
Code
Description
0102
Detects call for service on fax control PWB.
0103
Detects call for service on engine PWB.
0104
Communication error.
0105
Detects call for service on main PWB.
01FF
CF error.
0202
No CF card.
0203
No data in CF card.
0204
CF data is incompatible.
0205
Bad CF data (Checksum error)
0206
CF read error.
0207
CF write error.
0212
Fax control PWB flash memory error.
Description
Description
Writing the backup data of fax control PWB
Reading the backup data of fax control PWB
Writing the backup data of fax dial information
Reading the backup data of fax dial information

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-3040

Table of Contents