Kyocera KM-2540 Service Manual page 163

11. Replace the forwarding, paper feed and
separation pulleys.
12. Refit all the removed parts.
When refitting the forwarding pulley, orient it
correctly as shown in Figure 1-5-6.
13. When the forwarding pulley, paper feed pul-
ley, separation pulley or the primary paper
feed unit is replaced, perform maintenance
mode U903 to clear the jam counter (see
page 1-3-61).
Machine front
Forwarding pulley
Figure 1-5-8
2JB/2JC
Machine rear
1-5-5