Communication Environment Setup
This section describes how to set up the environment for communication between the machine and computers on your
network. If you are configuring the settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of the machine. For details,
see e-Manual > Settings/Registration.
[SNMP Settings] does not support AppleTalk networks.
1
On the Network screen, press [SNMP Settings] → specify the settings for SNMP v . 1 .
[On] for <Use SNMP v. 1>: Follow the procedure below to specify the MIB access permissions and community names.
Communication Environment Setup
5
5-11