Forwarding Client Settings; Client-Side Settings; Remote Fax Tx Settings - Canon imageRunner C5051 Getting Started

Forwarding Client Settings

You can specify the settings to forward a received fax as an I-fax to the client. To forward faxes, it is necessary to register the
client's I-fax address as the forwarding destination on the server machine, and specify any necessary forwarding settings. For
information on forwarding settings, see e-Manual > Settings/Registrations.

Client-Side Settings

Remote Fax TX Settings

You can set the Remote Fax TX settings for when you are using the machine as a client.
For information on necessary optional equipment to use this function, see e-Manual > Optional Products.
Remote Fax TX Server Address
You can specify the IP address or the host name for the imageRUNNER ADVANCE series (Remote Fax Server) on the server-side.
To specify the IP address, you can register the IPv4 address and IPv6 address.
TX Timeout
If the TX Timeout time is set and the set time has elapsed, the remote fax job is cancelled when the Remote Fax Server is not responding.
Number of Lines for Sending
You can set the number of lines you can select when sending remote fax. If Remote Fax Server is connected to multiple telephone lines,
you can set multiple lines.
Priority TX
You can select the priority line. When the priority line is selected and the line is not in use, the machine sends the fax documents with the
11
line set on [Priority TX]. When the priority line is not selected, the machine selects the line automatically.
11-10
Remote Fax Settings