Sending Faxes From A Computer Via The Machine - Canon imageRunner C5051 Getting Started

Sending Faxes from a Computer via the Machine

The following operations and settings are required to send faxes from a computer via the machine.
For information on the system requirements for using this function, see "Printing or Sending a Fax from a Computer, " on p. 4-2.
1
Connect the machine to a computer .
2 To connect via a network
See "Connecting to a Network, " on p. 5-3.
See "Interface Settings, " on p. 5-9.
See "Communication Environment Setup, " on p. 5-11.
To connect via USB*
See "Connecting to a USB Interface, " on p. 5-5.
*In this case, proceed to step 3 after connecting the machine.
2
Set the machine for the type of network you are using .
For a TCP/IP network
See "TCP/IP Network Setup Procedures, " on p. 6-2.
See "Protocol Settings, " on p. 6-3.
For a NetWare network
See "NetWare Network Setup Procedures, " on p. 7-2.
See "Protocol Settings, " on p. 7-3.
For an SMB/CIFS network
See "SMB/CIFS Network Setup Procedures, " on p. 8-2.
See "Protocol Settings, " on p. 8-3.
For an AppleTalk network
See "AppleTalk Network Setup Procedures, " on p. 9-2.
See "Protocol Settings, " on p. 9-3.
3
Install the fax driver in the computer to use .
See Chapter 13, "Before Sending Faxes from Computers. "
4
Specify the settings required for sending faxes .
See "Fax Settings, " on p. 11-2.
2-10
Operations Required to Use the Machine