Canon imageRunner C5051 Getting Started page 135

3
Specify the mail server for sending e-mail/I-faxes .
If you are using an SMTP server that requires POP before SMTP (method for authenticating users who have
logged in the POP server before sending e-mail):
☐
In [SMTP Server], enter the IP address or name of the SMTP server using the keyboard on the touch panel display.
Press [On] for <POP Authentication before Send> → press [Off ] for <SMTP Authentication (SMTP AUTH)>.
If you are using an SMTP server that requires SMTP Authentication (method for authenticating users who
have logged in the SMTP server before sending e-mail):
☐
In [SMTP Server], enter the IP address or name of the SMTP server using the keyboard on the touch panel display.
Press [On] for <SMTP Authentication (SMTP AUTH)> → press [Off ] for <POP Authentication before Send>.
In [User], enter the user name used for logging in to the SMTP server. If you are using a Microsoft SMTP server, enter the user name
in [User] using the following format: user name@domain name.
In [Password], enter the password used for logging in to the SMTP server.
To encrypt data to be sent using SSL, select [On] for <Allow SSL (SMTP Send)>
If you want to display the authentication screen when sending, set [Display Auth. Screen When Send].
If the SMTP host does not support encryption, data is not encrypted when [On] is selected for <Allow SSL (SMTP Send)>.
If you are using an SMTP server that does not require authentication for sending e-mail:
☐
In [SMTP Server], enter the SMTP server IP address or name using the keyboard on the touch panel display.
Press [Off ] both for <SMTP Authentication (SMTP AUTH)> and <POP Authentication before Send>
.
6-27
Protocol Settings
6