Remote Fax Settings
You can send/receive faxes on an imageRUNNER ADVANCE series machine even if the machine is not connected to a
telephone line, by using a remote fax server.
To send and receive remote faxes, it is necessary to perform the following procedures.
1
Server-Side Settings (See "Server-Side Settings," on p . 11-9 .)
Specify the settings for the imageRUNNER ADVANCE series machine that is being used as a remote fax server.
2
Client-Side Settings (See "Client-Side Settings," on p . 11-10 .)
Specify the settings for the imageRUNNER ADVANCE series machine that is sending and receiving remote faxes.
Server-Side Settings
Specify Whether to Send Faxes from the Client
You can specify whether to send faxes from the client.
Use Remote Fax
If the machine is used as the server machine of the Remote Fax, set [Dedicated Port Settings] (Preferences) to 'On' . (See e-Manual >
Network.)
1
Press
→ [Function Settings] → [Send] → [Fax Settings] → [Remote Fax Settings] .
2
Press [Use Remote Fax] on the Remote Fax Settings screen .
3
Select [On] or [Off] for <Use Remote Fax> .
<Use Remote Fax>
[On]: You can use the Remote Fax function.
[Off ]: You cannot use the Remote Fax function.
11-9
Remote Fax Settings
11