Canon imageRunner C5051 Getting Started page 128

In order to select [On] for <Use SSL> to allow SSL communication, a key pair is necessary. You can use the preinstalled key pair, or
generate an original key pair with the machine, to set as the default key. For information on the default key, and instructions on
how to generate an original key pair, see e-Manual > Security.
8
On the TCP/IP Settings screen, press [Multicast Discovery Settings] → specify the following .
6
[On] for <Response>: You can use device information from other devices, such as an Address Book or Department ID Management
settings, or respond to a multicast discovery from utilities.
Optionally, press [Scope Name] and enter the scope name for a multicast discovery.
For instructions on how to deliver and share device information, such as the Address Book and Department ID Management
settings with multiple devices, see e-Manual > Security.
6-20
Protocol Settings