Canon imageRunner C5051 Getting Started page 32

2
Confirm that the breaker lever is switched to the OFF (" " side) position .
•
Do not use the test button to turn the power ON and OFF.
•
If the breaker lever does not switch to the OFF ("
•
If the breaker lever does not switch to the OFF ("
contact your local authorized Canon dealer.
3
Switch the breaker lever to ON ("I" side) .
xxx
OFF
( side)
ON
( I side)
" side) position, repeat step 1.
" side) position, despite carrying out the above procedure two or three times,
OFF
( side)
ON
( I side)