Remote Ui; Troubleshooting 7; Communication Environment Setup - Canon imageCLASS MF6500 Series Advanced Manual

Advanced Fax
1
Features

Communication Environment Setup

Advanced Copy
Features 2
Network
3

Remote UI

4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
This section describes two additional protocols supported
for this machine: HTTP (HyperText Transfer Protocol) and
SNMP (Simple Network Management Protocol).
HTTP
HTTP helps communicate between your computer and the
machine via a web interface (e.g., Remote UI).
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Confirm that <TCP/IP SETTINGS> is
displayed, then press [OK].
5.
Use [ ] or [ ] to select <USE HTTP>,
then press [OK].
Back Previous
6.
Use [ ] or [ ] to select <ON>, then press
[OK].
7.
Use the numeric keys to enter the HTTP port
number, then press [OK].
8.
Press [Stop] to return to standby mode.
9.
Restart the machine.
SNMP
SNMP helps monitor the state of the machine and collects
information on it. The following two items can be set:
<COMMUNITY NAME>:
Sets the SNMP community name. You can specify up to two
community names.
<SNMP WRITABLE>:
Enables the computers on the network to access the machine
and modify its settings if this item is activated. You can specify
this setting for each community separately.
TOP
Next
3-7