Fax Activity Report - Canon imageRunner C5051 Getting Started

RESULT
"OK," "NG," or "- -," and the transmission time are printed.
If the documents have been received successfully by the recipient, "OK" is printed.
If a sending error occurs, "NG" (No Good) is printed, and the error code is printed on the second line.
When sending is successful, but it is not confirmed whether the e-mail message or I-fax, or the file that you sent was actually delivered, "--"
is printed.
If a field exceeds its display capacity, only those characters that fit in the display are printed.

Fax Activity Report

The Fax Activity Report is a printed log that shows the results of send and receive jobs. A Fax Activity Report can be printed
either automatically or manually.
A Fax Activity Report is automatically printed when either the number of communication results reaches 40, or a specified
time is reached. You can set whether to automatically print an Activity Report. (See e-Manual > Settings/Registration.)
•
When the message <Check the printer. Call service representative.> is displayed to indicate that the Print function is unavailable, the
machine automatically prints a Fax Activity Report after it recovers from the problem. The latest 40 communication results are printed on
the report.
•
This mode is available only if the FAX Board is installed.
DEPT . ID
If Department ID Management is set, the Department ID is printed. Transmission logs are listed according to the Department ID.
ST . TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to be transmitted or received are printed. An asterisk (*) indicates
a job that has already been printed. If SSO-H is set as the login service, the user name used for login is printed below the start time. When
the machine cannot specify the user (for example, when automatically forwarding), the user name is not printed.
DESTINATION ADDRESS
The name and fax number of the remote party are printed. If a subaddress or Sender Name has been specified, it is printed beneath the
fax number.
NO .
The four digit number, that is automatically assigned when the document is accepted for sending or receiving, is printed. Numbers
between 0001 and 4999 are for sending, while numbers between 5001 and 9999 are for receiving.
MODE
The communicated contents and the Communication mode are printed.
Sending:
Receiving:
Communication mode:
Line Type (displayed only when multiple lines are used): 1, 2
PGS .
The number of pages that were sent or received is printed.
TX, Sequential Broadcast TX, Delayed Sequential Broadcast, Transfer TX, Direct Sending
Manual RX, Automatic RX, Confidential Fax Inbox RX, Memory RX, Transfer RX
G3/ECM
16
16-11
Reports