Select A Safe Power Supply - Canon imageRunner C5051 Getting Started

Do not remove the machine's leveling feet .
Do not remove the machine's leveling feet after the machine has been installed. If you put weight on the front of the machine while the
drawers or units within the machine are pulled out, the machine may fall forward. To prevent this from happening, make sure that the
machine's leveling feet are in place.

Select a Safe Power Supply

Plug the machine into a 220 - 240 V AC outlet .
Make sure that the power supply for the machine is safe, and has a steady voltage .
Do not connect other electrical equipment to the same power outlet to which the machine is
connected .
Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock .
The power cord may become damaged if it is stepped on, affixed with staples, or if heavy objects are
placed on it . Continued use of a damaged power cord can lead to an accident, such as a fire or electrical
shock .
The power cord should not be taut, as this may lead to a loose connection and cause overheating,
which could result in a fire .
If excessive stress is applied to the connection part of the power cord, it may damage the power cord or
the wires inside the machine may disconnect . This could result in a fire . Avoid the following situations:
•
Connecting and disconnecting the power cord frequently.
•
Tripping over the power cord.
•
The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part.
•
Applying excessive force on the power plug.
Installation Location and Handling
1
1-5