Protocol Settings; Tcp/Ip Settings; Smb And Wins Settings - Canon imageRunner C5051 Getting Started

Protocol Settings

This section describes how to specify the protocol settings for the machine using the control panel. If you are configuring the
settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of the machine. For details,
see e-Manual > Settings/Registration.

TCP/IP Settings

1
Specify the TCP/IP settings .
If you have not entered the TCP/IP settings yet, enter them now. (For more information, see "TCP/IPv4 Settings, " on p. 6-3, "TCP/IPv6
Settings, " on p. 6-9 and "Settings Common to TCP/IPv4 and TCP/IPv6, " on p. 6-16.)

SMB and WINS Settings

To use the machine on an SMB/CIFS network, specify the SMB settings. The 2.5inch/80GB HDD or 2.5inch/250GB HDD is
required to specify the SMB settings.
To resolve a name with WINS(Windows Internet Name Service), specify the WINS settings using the following procedure. WINS
is a service for associating a NetBIOS name (which is a computer name or printer name on an SMB/CIFS network) with an IP
address. To use WINS, specify the IP address settings for the WINS server.
8-3

Protocol Settings

8