Communication Environment Setup; Settings From The Control Panel - Canon IMAGERUNNER 4570 Network Manual

Communication Environment Setup

To set up a configuration for communication between the machine and computers
on your network, use the following procedure.
2
NOTE
After configuring TCP/IP settings, you can change the content by using the Remote UI.

Settings from the Control Panel

The procedure for specifying the settings from the control panel is as follows:
IMPORTANT
Settings specified from the control panel become effective after the machine is restarted,
after the procedure.
NOTE
For instructions on how to enter characters using the touch panel display, see Chapter 2,
"Basic Operations," in the Reference Guide.
1
2-12

Communication Environment Setup

Specify the SNMP settings.
G If you want to set or browse each item of the machine with a utility
that uses SNMP to obtain information:
❑
(Additional Functions) © [System Settings] © [Network Settings].
Press
❑
Press [M] or [L] until [SNMP Settings] appears © press [SNMP Settings].