Canon imageRunner C5051 Getting Started page 113

•
If the machine is restarted after DHCP, BOOTP, or RARP settings are specified, the TCP/IP Settings screen displays the IP address
setting values obtained from the DHCP, BOOTP, or RARP server. (If the IP address, host name, and domain name have been
previously set, these will be overwritten by the setting values obtained from DHCP, BOOTP, or RARP.)
•
If you use DHCP without the DNS dynamic update function, it is recommended that an identical IP address be assigned to the
machine at all times. (If the IP address is not identical, the host name for the machine will not correspond to the IP address.)
4
On the TCP/IP Settings screen, press [DNS Settings] → [DNS Server Address Settings] .
5
In <IPv4>, specify the following .
If you want to use dynamic DNS updating, enter the IPv4 address of the DNS server in [Primary DNS Server].
If you do not want to set up a secondary DNS server, enter <0.0.0.0>.
If you set [BOOTP] or [DHCP] to 'On' in step 3, the IP address of a DNS server you set manually will be overwritten.
6-5
Protocol Settings
6