Using The Machine As A Scanner - Canon imageRunner C5051 Getting Started

Using the Machine as a Scanner

The following operations and settings are required to use the machine as a scanner.
1
Connect the machine to the network .
See "Connecting to a Network, " on p. 5-3.
See "Interface Settings, " on p. 5-9.
2 2
Set the machine to use the TCP/IP network .
See "TCP/IP Network Setup Procedures, " on p. 6-2.
See "Protocol Settings, " on p. 6-3.
3
Install the software for specifying scanner settings (Network ScanGear) into the computer connected to the machine .
See Chapter 14, "Before Using the Remote Scan Function."
2-12
Operations Required to Use the Machine