Registering Sender Names - Canon imageRunner C5051 Getting Started

Registering Sender Names

For fax, you can register any name as the Sender Name, such as the section or department's name, or an individual's name.
The registered Sender Name can be displayed on the touch panel display of the receiving party's machine and/or printed at
the top of the documents that you send as the sender's information.
•
You can set to display/print the Sender Name instead of the name stored as the unit's name from the Options screen. (See e-Manual >
Using the Machine to Send/Receive a Fax.)
•
For this setting, the FAX Board is required.
1
Press
2
Select the number under which you want to register the Sender Name → press [Register/Edit] .
You can store up to 99 sender names (01 to 99).
To delete a stored Sender Name, select the number under which the name is registered → press [Delete]. Only one sender name can
11
be deleted at a time.
If logging in using SSO-H, the login name is displayed in <99> of Sender Name (TTI). In this case, you can register, edit, or delete the
Sender Name in <99>. For more information on the MEAP login service, see e-Manual > MEAP.
3
Enter the Sender Name → press [OK] .
11-8
Fax Settings
→ [Function Settings] → [Send] → [Fax Settings] → [Register Sender Name (TTI)] .