Managing the Machine from a Computer
The following operations and settings are required to manage the machine from a computer.
1
Connect the machine to the network .
See "Connecting to a Network, " on p. 5-3.
See "Interface Settings, " on p. 5-9.
2
Set the machine to use the TCP/IP network .
See "TCP/IP Network Setup Procedures, " on p. 6-2.
See "Protocol Settings, " on p. 6-3.
3
Enable the machine to be managed from computers .
To enable the Remote UI
See "System Requirements for Using the Remote UI, " on p. 15-2.
See "Before You Start the Remote UI, " on p. 15-3.
To enable the MEAP management function (SMS)
See "System Requirements for Using SMS, " on p. 15-6.
See "Before Starting SMS (Preparations), " on p. 15-7.
Operations Required to Use the Machine
2
2-13