e
Caution:
Connect the positive battery terminal first, then the
negative terminal.
•
Apply acid-proof grease to the battery terminal
posts.
•
Install the battery.
•
Secure the fuel tank in position.
•
Install right and left side trim panels.
•
Install dualseat.
•
Switch on the ignition.
•
Without starting the engine, fully open the throttle
once or twice so that the Motronic control unit
can register the throttle-valve positions.
L
Note:
Disconnecting the battery deletes all entries (e.g.
faults, settings) stored in the Motronic control unit's
memory.
Loss of settings can temporarily impair the operat-
ing characteristics when the engine is restarted.
X
Tightening torque:
Fuel tank to rear frame ................................. 10 Nm
00.16
Checking engine oil level when
cold, adding oil if necessary
•
Check the oil level with the motorcycle upright: if
necessary, use stand, BMW No. 00 1 560, to
keep the motorcycle in the upright position.
e
Caution:
Never top up the engine-oil level past the MAX mark.
Required level:............................................... MAX
MAX
MIN
S000040