Starter Pinion Installation; Magneto Dismantling - Linhai 2004 ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
ATV SERVICE MANUAL09.0
Clean assembly with solvent and lube with dry
graphite or light grease.
Do not use heavy grease. This will limit the fast
movement of the starter pinion.
INSTALLATION
Apply a light film of grease to the gears and install
the starter pinion by reversing the removal
procedure.
Install the left crankcase cover.
3.10 Magneto
3.10.1 Dismantling:
Remove the four screws, and remove the fan
cover.
CHAPTER 3B ENGINE PAGE 3B - 66 -