CHAPTER 8 ELECTRICAL
TAILLIGHT / BRAKELIGHT LAMP REPLACEMENT
1. From the rear of the taillight remove two screws
holding lens cover in place and remove
lens cover.
2. Remove lamp and replace it with recommended
lamp.
3. Reinstall the lens cover removed in step 1.
4. Test the taillight / brake light.
Special Edition – Anniversary and B-Type
and 400ATV-2
To turn the two adjusting screws ③ clockwise is to lower
the beam. To turn the two adjusting screws ③
counterclockwise is to heighten the beam.
ATV SERVICE MANUAL 09.0
CHAPTER 8 ELECTRICAL PAGE.8-
4