CHAPTER 8 ELECTRICAL
*
6. Ignition coil resistance
Disconnect the ignition coil
connector from the wire
harness.
Connect the pocket tester
(1) to the ignition coil.
Check if the primary coil
has the specified resistance.
Primary coil resistance:
3.6-4.8Ω(20
Connect
the
(Ω×1k ) to the ignition coil.
Check the secondary has the
specified resistance
Secondary coil resistance:
10.7-14.5 KΩ (20℃)
BOTH MEET
SPECIFICATION
*
℃
)
pocket
tester
ATV SERVICE MANUAL 09.0
Tester (+) lead
Pink Terminal
Tester ( ) lead B/Y
Terminal
Tester (+) lead
Spark plug lead
Tester (— ) lead
Pink Terminal
OUT OF SPECIFICATION
Replace the ignition coil.
CHAPTER 8 ELECTRICAL PAGE.8- 11