Linhai 2004 ATV 260 Service Manual page 111

CHAPTER 3A ENGINE
14.Inspection:
Needle valve
Wear→Replace.
Check the float valve and valve seat for scoring
scratches, clogging or damage.
check the tip of the float valve, where it contacts
the
valve seat, for stepped wear or contamination.
check the operation of the float valve.
15.Remove:
Pilot jet
Check the pilot jet for wear or damage. Clean
the
pilot jet with cleaning solvent and blow this open
with compressed air.
16.Remove:
Main jet
Check the main jet for wear or damage. Clean
the
main jet with cleaning solvent and blow this
open
with compressed air.
260/ 300 / 400 cc ATV SERVICE MANUAL09.0
CHAPTER 3 ENGINE PAGE. 3A- 72