Cylinder Body, Piston And Piston Ring - Linhai 2004 ATV 260 Service Manual

CHAPTER 3C ENGINE 100/125/150/200
SERVICE MANUAL09.0
15. Eliminate carbon deposits from valve seat.
NOTE:
Be sure not to scratch the valve seat contact
face.
16. Measure valve guide inside diameter.
Limit: Intake：
exhaust ：5.10mm
Install cylinder head in the reverse order of
removal.
3.4.2 Cylinder body, piston and piston
ring
1. Remove cylinder body.
2. Remove cylinder
Eliminate carbon deposits from gasket.
3. Remove piston pin circlip, piston pin and
piston.
NOTE:
Make sure the circlip does not fall into the
crankcase.
CHAPTER 3C ENGINE
5.08mm
gasket dowel
PAGE.3C - 10 -
pin.