CHAPTER 3C ENGINE 100/125/150/200
SERVICE MANUAL09.0
5. Measure tip clearance between rotors and
pump housing.
Limit :0.2mm
6.
Inspect oil pump inner and outer rotors
for abnormal wear. If so, replace the oil
pump assembly.
7. Fasten
oil
assembling.
Install oil pump in the reverse order of removal.
NOTE:
Be sure to point the arrow on the oil pump to the
direction of crankshaft in installation and infuse
some oil into the pump beforehand.
3.5 CARBURETION
1. Remove auto choke lead coupler.
CHAPTER 3C ENGINE
pump
with
screws
PAGE.3C - 26 -
after