Linhai 2004 ATV 260 Service Manual page 214

CHAPTER 3C ENGINE 100/125/150/200
SERVICE MANUAL09.0
17. Take out crankshaft and timing chain.
18. Clean gasket on crankcase contact face .
NOTE:
Make sure the contact faces are not scratched to
avoid oil leakage.
19. Remove oil seal from crankcase. Inspect oil
seal for wear.
20. Measure connecting rod big end side
clearance.
Limit ：0.55mm.
21. Measure big
clearance.
limit ：0.55mm
22. Measure small end orifice inside diameter.
limit ： 15.06mm
CHAPTER 3C ENGINE
end crankpin diametral
PAGE.3C - 22 -