Fascia Fitting; Homeflame Dream/Masquerade/Excelsior/Classica Models - Valor Homeflame Dream Installation And Owner's Manual

Before fitting the fascia ensure that the information on the back pages of the owner
guide have been completed.

14.1 Homeflame Dream/Masquerade/Excelsior/Classica models.

14.1.1 Fitting the outlet baffle.
Locate the outlet baffle and secure in place using two tapping screws supplied (See fig. 30)
Figure 30. Outlet baffle.
14.1.2 Preparing the fascia.
1. As supplied the Dream, Masquerade and Excelsior fascia have an hood that requires
fitting (See figure 31A) and (Figure 31B shows the slightly different hood assembly on the
Classica).
2. Locate the hood and secure it using the four screws supplied.
Figure 31A. Fascia preparation (Fascia may
differ from that shown).
© GDC Group Ltd. 2012
INSTALLER GUIDE

14. FASCIA FITTING

Page 33
Hood Assembly to
frame with four M4
machine screws
Figure 31B. Fascia preparation (Fascia
may differ from that shown).