To Remove And Fit The Window Mounting Frame And Window Assembly; To Remove The Window Assembly - Valor Homeflame Dream Installation And Owner's Manual

INSTALLER GUIDE
16.7 To remove and fit the window
mounting frame and window assembly.
When servicing the appliance it will be
necessary to remove all of the window
mounting frame and the window assembly
to enable the front coal, ceramic walls and
burner to be removed.
1. Remove the fascia as in section 16.4.
2. Unscrew and remove the six screws that
secure the window mounting frame and
window assembly. Remove and place away
from the work area (See figure 43).

16.8 To remove the window assembly.

1. On Harmony models - Remove the fascia
as in section 16.4. On the Dream,
Masquerade, Excelsior and Petrus models
Figure 43. Window assembly removal
there is no need to remove the fascia.
To remove.
1. The window assembly is held in place
with two brackets that rotate around a
central pivot point. Push the brackets up
and clear of the window assembly (See
figure 44). Gently pull the top of the window
forward and lift the window assembly clear
of its support channels (See figure 45).
Place the window assembly in a safe place
away from the work area.
Figure 44. Window removal
© GDC Group Ltd. 2012
Page 41