To Remove The Main Burner Injector; To Remove The Appliance From The Fireplace - Valor Homeflame Dream Installation And Owner's Manual

16.18 To remove the main burner injector.

(See figure 52).
1. Remove the burner (See section 16.17).
2. Remove the burner clamping screw (See figure 52).
3. Unscrew the injector from the burner.
4. Refit in the reverse order.

16.19 To remove the appliance from the fireplace.

1. Remove the burner unit (See section 16.12).
2. If the fire retention is as method 1 (See section 9.1 of this guide), remove the
screws.
If the fire retention is as method 2 (See section 9.2 of this guide), slacken the
hexagonal adjusters on the cable retainers and unscrew the thumbscrews to release
the cables.
3. Refit as described in the relevant installation sections. Make sure gas soundness,
sealing, spillage test and performance are satisfactory.
© GDC Group Ltd. 2012
INSTALLER GUIDE
Page 46
Figure 52. Main burner
injector removal