Installer Guide - Valor Homeflame Dream Installation And Owner's Manual

Section Heading
10. BURNER AND SUPPLY PIPE INSTALLATION
10.1 Burner and supply pipe installation.
10.2 Preliminary burner checks.
10.3 Inlet pressure check.
11. FITTING THE CERAMIC FUEL EFFECT
12. FITTING THE WINDOW FRAME ASSEMBLY
13. OPERATING AND SPILLAGE CHECKS
13.1 Checking the control settings.
13.2 Check for spillage.
13.3 Flame supervision and spillage monitoring system.
14. FASCIA FITTING
14.1 Homeflame Dream/Masquerade/Excelsior/Classica models.
14.2 Homeflame Harmony model.
14.3 Homeflame Petrus model.
15. FINAL REVIEW
16. SERVICING & PARTS REPLACEMENT
16.1 Checking the aeration setting of the burner.
16.2 To remove the ignition microswitch.
16.3 To remove the gas shut-off microswitch.
16.4 To remove the fascia.
16.5 To replace the control slide unit.
16.6 To replace the control slide button.
16.7 To remove and fit the window mounting frame and window assembly.
16.8 To remove the window assembly.
16.9 To remove the fuel effect.
16.10 To remove the ceramic side walls.
16.11 To remove the electronic ignition generator.
16.12 To remove the complete burner unit.
16.13 To remove the thermocouple interrupter block
16.14 To remove the pilot unit.
16.15 To remove the shut-off tap.
16.16 To remove the gas flow rate controller.
16.17 To replace the burner.
16.18 To remove the main burner injector.
16.19 To remove the appliance from the fireplace.
© GDC Group Ltd. 2012

INSTALLER GUIDE

CONTENTS (Continued)
Page 6
Page
28
28
28
29
29
30
30
30
31
32
33
33
35
35
37
38
38
39
39
39
40
40
41
41
42
42
42
43
43
44
44
45
45
46
46