Korg Synthesizer/Vocoder micro Owner's Manual: Restoring The Factory Settings; Write Protect Setting

Synthesizer/vocoder. Uploaded by: Da'Vidd Hollosy  
Hide thumbs

Advertisement

Restoring the factory settings

7-1. PRELOAD (
)
Restoring the factory settings
This operation restores the microKORG's
programs and global data settings to the
factory-set condition. The factory-set
settings are referred to as the "preload
data."
When you restore the Preload settings,
the data within the microKORG will be
rewritten to the factory settings. Be
sure that you don't mind losing your
current data before you restore the
factory settings.
Do not touch the microKORG's knobs
or keyboard while the Preload
operation is being executed, and never
turn the power off.
Preload cannot be executed if the
SHIFT function "WRITE PROTECT is
on. You must turn "WRITE PROTECT"
off beforehand.
Procedure
1
Hold down the SHIFT key and press
the 7 key.
The display will indicate "
."
2
Turn the 1 knob to select the data that
will be restored to its factory-set
1
1, 4
condition.
1Program (
):
Load only data for one program.
Program (
):
Load data for all programs (128
programs).
Global (
):
Load global data. ( p.58)
To cancel, press the lit SHIFT key.
If you selected 1Program (
) in step
3
2
, turn knob 2 to select the program
(A.11–b.88) that will be restored to its
factory-set condition.
4
ress the blinking 7 key. The Preload
operation will be executed, and the
microKORG will return to its normal
state.
If you have not selected the data to be
restored to the factory-set condition
2
3
(steps
or
), the 7 key will be lit. If
you attempt to execute by pressing the
7 key in this state, the display will
indicate "---" and the operation will not
be executed.
2 3
Write protect setting
8-1. WRITE PROTECT (
)
Write protect setting
The microKORG provides a write protect
setting that disables writing to memory,
letting you prevent data from being
rewritten accidentally. If you want to save
data that you have edited, you must first
turn write protect off.
Procedure
Hold down the SHIFT key and press
1
the 8 key.
The display will indicate "
."
2
Turn the 1 knob to switch write protect
on/off.
OFF (
):
Data can be written to internal memory.
ON (
):
The following writing operations will
be prohibited.
• Writing a program
• Loading the factory data
• Receiving a data dump
1
1, 3
3
When you have made the desired
setting, press the lit 8 key or SHIFT
key. The microKORG will return to its
normal state.
2
63

Advertisement

   Related Manuals for Korg Synthesizer/Vocoder microKORG

This manual also for:

Microkorg

Comments to this Manuals

Symbols: 0
Latest comments:
  • timothy a henry Dec 11, 2015 05:04:
    I couldn't get separate keys for my miro korg.

    I had to buy the whole key assemble

    ​I needed one ocatave of white keys

    timo​thy a henry
    ph# 647 785 5973

    than​ks