Korg Synthesizer/Vocoder micro Owner's Manual: Eq — Synth/vocoder

Synthesizer/vocoder. Uploaded by: Da'Vidd Hollosy  
Hide thumbs

Advertisement

LOW EQ FREQ. [40Hz...1.00kHz]
Sets the frequency of the low-range
equalizer.
42
18. EQ
— SYNTH/VOCODER
This is a two-band equalizer. Use EQ FREQ (knobs 1 and 3 to specify the frequency that you want to adjust, and use knobs 2 and 4 to adjust
the gain of each frequency band.
Excessively raising the equalizer gain parameters may cause the output to be distorted.
LOW EQ GAIN
[-12...12]
HI EQ FREQ.[1.00kHz...18.0kHz]
Sets the amount of boost or cut for
Sets the frequency of the high-range
the low-range equalizer.
equalizer.
HI EQ GAIN
[-12...12]
Sets the amount of boost or cut for
equalizer.

Advertisement

   Related Manuals for Korg Synthesizer/Vocoder microKORG

This manual also for:

Microkorg

Comments to this Manuals

Symbols: 0
Latest comments:
  • timothy a henry Dec 11, 2015 05:04:
    I couldn't get separate keys for my miro korg.

    I had to buy the whole key assemble

    ​I needed one ocatave of white keys

    timo​thy a henry
    ph# 647 785 5973

    than​ks