Initializing Ch Level And Ch Pan; Vocoder; Midi Filter - Korg Synthesizer/Vocoder microKORG Owner's Manual

Synthesizer/vocoder
Table of Contents

Advertisement

Initializing CH LEVEL and CH PAN

1-2. INIT LEVEL (
)
Initializing CH LEVEL A/B
You can access this function if a vocoder
program is selected.
This will simultaneously initialize the
output levels of the eight band-pass filter
channels for the carrier (SYNTHESIS
FILTER). When you initialize the levels,
all output levels will be set to 127.
Procedure
1
Hold down the SHIFT key and press
the 1 key.
The display will indicate "
Press the blinking 1 key.
2
The output levels will be initialized,
and then the microKORG will return to
its normal state.
If you decide to cancel, press the lit
SHIFT key.
1, 2
60

–VOCODER

2-2. INIT PAN (
)
Initializing CH PAN A/B
You can access this function if a vocoder
program is selected.
This will simultaneously initialize the pan
of the eight band-pass filter channels for
the carrier (SYNTHESIS FILTER). When
you initialize the pan settings, each filter
channel will be set to Center.
Procedure
1
Hold down the SHIFT key and press
the 2 key.
."
The display will indicate "
Press the blinking 2 key.
2
The pan settings will be initialized, and
then the microKORG will return to its
normal state.
If you decide to cancel, press the lit
SHIFT key.
1
1, 2

MIDI Filter

4-1. MIDI FILTER (
MIDI Filter
These settings specify whether the
corresponding types of MIDI data will be
received and transmitted.
Procedure
Hold down the SHIFT key and press
1
the 4 key.
The display will indicate "
Turn the appropriate knob 1–4 to make
2
the desired settings.
[1] knob: PROGRAM CHANGE
."
Selects whether program changes will
be transmitted and received.
Disable (
):
Program changes will not be transmit-
ted or received.
Enable (
):
Program changes will be transmitted
and received.
[2] knob: CONTROL CHANGE
Selects whether MIDI control changes
will be transmitted and received.
Disable (
):
MIDI control changes will not be
transmitted or received.
1
1, 3
)
Enable (
MIDI control changes will be
transmitted and received.
[3] knob: PITCH BEND
Selects whether pitch bend messages
will be transmitted and received.
Disable (
."
Pitch bend messages will not be
transmitted or received.
Enable (
Pitch bend messages will be
transmitted and received.
[4] knob: SYSTEM EXCLUSIVE
Selects whether MIDI system
exclusive messages will be transmit-
ted and received.
Disable (
MIDI system exclusive messages will
not be transmitted or received.
Enable (
MIDI system exclusive messages will
be transmitted and received.
When you have finished making
3
settings, press the lit 4 key or the
SHIFT key. The microKORG will
return to its normal state.
2
1
):
):
):
):
):

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microkorg

Table of Contents