Removing Louver - Hitachi RCI-1.0FSN3 Service Manual

10 Servicing

10.1.13 Removing Louver

1 Remove the air panel according to the item "Removing Optional Air Panel".
2 Remove the corner cover according to the item "Removing Auto Louver Motors".
3 Remove the packings and guides.
4 Remove two (2) fixing screws for motors from the air panel. Remove the screw for louver bearing, and pull it out from
the air panel. Then, remove the louvers, louver bearings and motors.
5 Remove the motors for auto louver according to the item "Removing Auto Louver Motors".
6 Remove each louver bearing and louver spring.
N O T E
• When reassembling, securely catch the C-shaped part of louver spring onto the hooking part of
louver. Additionally, insert the L-shaped part of louver spring into the hole of louver bearing.
• Rotate the louver bearing 360o clockwise before fixing the screw for louver bearing.
Packing
Guide
Motor
for Auto Louver
Reassembling
315
SMGB0077 rev.0 - 01/2013
Air Panel
Louver Bearing
Louver
Louver Bearing
Hooking Part
Louver Bearing
Louver
Hole
Spring
Fixing Screw
Motor for Auto Louver
Air Panel
Louver Spring
Remove the louver bearing
and the motor for auto louver.
Louver
Bearing
10
Rotate 360
o
clockwise.