Removing Auto Louver Motors And Louver - Hitachi RAI-50PPD Service Manual

SERVICING
(4-Way Cassette (Compact) Type)
1.1.11 Removing Auto Louver Motors and Louver
(1) Remove the air panel according to the item 1.1.3 "Removing Optional Air Panel."
(2) Remove the fixing screw for C-cover and remove the C-cover.
(3) Remove the fixing screw for AS Motor from the air panel. Then remove the louver, louver bearing and
AS motor.
(4) Remove the AS motor, stopper and bearing from the louver.
(5) Disconnect the connector for the AS motor. Press the catch to disconnect the connector to avoid
breakage.
Screw
TURN OFF all power source switches.
C-Cover
Air Panel
Bearing
Rib
Stopper
Tool
Louver
Bearing
AS Motor
Louver
Bearing
AS Motor
Stopper
Air Inlet Side
Pay attention to the
direction of the stopper.
96
Phillips Screwdriver
Bearing
Air Panel
Connector