Hitachi RCI-1.0FSN3 Service Manual page 97

2 Unit installation

Anti-bacteria filter
For RCI-FSN3 indoor units: F-160L-K
The dimensions of the long-lasting anti-bacteria filter are shown in the following figure.
To fit the filter, insert the tab on the suction grille into the large hole in the filter, as shown in the figure below.
• Specifications
Part
Dust collection efficiency (%)
Air flow rate (m /min)
3
Initial pressure loss Pa
Final pressure loss Pa
Filter/Frame colour
Working life
Cleaning
Weight (kg)
Performance
Filter material
This is the standard working life of the filter and its duration may vary depending on the conditions of use. Clean the filter
(*)
with water or neutral detergent.
85
SMGB0077 rev.0 - 01/2013
Long Hole Packing
(Large)
513
Long Hole
Packing
(Small)
Air
Model
RCI-(1.0-2.5)FSN3
RCI-(3.0-6.0)FSN3
840
Indoor Unit
*Put the square holes into the
Modified acrylic fibre 1 (containing inorganic anti-bacterial substance)
Antibacterial fiber
Modified acrylic fibre 2 (containing organic anti-bacterial substance)
Reinforce net
2 Pieces
(Reinforcement)
Model
Air Flow Direction
Filter
Colored
Steel Plate
15
a (mm)
248
298
Antibacterical
Long Life Air Filter
Air Panel
Extruded Part*
Air Inlet Grille
extruded parts of air inlet grille.
RCI-(1.0-6.0)
50 (gravimetric method)
35.0
28.0
62.0
White/Brown
4 years (with maintenance every 1250 hours)
Available
(*)
0.6
Avoids the multiplication of bacteria and mold
PP
2