Hitachi RCI-1.0FSN3 Service Manual page 207

Indoor units system free series & complementary systems fsn(h)(2/3/4)(e/m)(i)(-du)

Hide thumbs Also See for RCI-1.0FSN3:

Table of Contents

5 Control system

For RPK-(2.0-4.0)FSN3M

C A U T I O N

Turn off the power supply before setting the DIP switches. If not, the settings will not be valid.

The symbol "■" indicates the position of the DIP switches. The figures show the setting before transmission

or after selection.

If the ■ mark is not displayed, this indicates that the position of the pin is not affected.

SMGB0077 rev.0 - 01/2013

Connector indication

Micro-computer control expansion valve

Motor for automatic swing louver

Printed circuit board 2

Switch indication

Capacity code

Unit model code

Refrigerant cycle number

Indoor unit number settings

Fuse re-establishing

Show Quick Links

Table of Contents