Hitachi RCI-1.0FSN3 Service Manual page 34

2 Unit installation
• If any gap has even though tighten long screws sufficient, readjust the height of indoor unit.
• It's able to adjust the indoor unit height by using wrench from the corner pocket.
• Too considerable adjustment of height cause dewing from drain-pan.
• Do not turn the air louver by hand. If moved, the louver mechanism would be damaged.
Attachment of Corner Pocket Cover
Attach the corner pocket covers after the air panel is mounted completely.
a. Catch the band at the rear side of the corner pocket cover onto the projection at the air panel as shown.
b. Insert and push the fixing hooks (2 portions) at Ⓐ to the air panel and insert and push the fixing hook (1 portion) at
Ⓑ to the air panel.
22
SMGB0077 rev.0 - 01/2013
No gap shall exist
Wrench
Projection
Band
Fixing hook
A
A
B
A
Fixing hook
B