Front Fork Installation - Yamaha XVS6501997 Service Manual

FRONT FORK
10. Fill:
S Fork oil
Each fork:
0.454L (454 cm
Yamaha fork oil 10WT or equiv-
alent. After filling up, slowly
pump the fork up and down to
distribute the fork oil.
Oil level a :
114 mm
(from the top of the inner tube
fully compressed and without
the fork spring)
NOTE:
Hold the fork in an upright position.
11. Install:
S Fork spring 1
S Spring seat 2
S Spacer collar 3
S O-ring
S Cap bolt
NOTE:
D Before installing the cap bolt, apply grease to
the O-ring.
D Temporarily tighten the cap bolt.

FRONT FORK INSTALLATION

1. Install:
S Front forks 1
NOTE:
Make sure that the inner tube end is flush with
the top of the upper bracket.
2. Tighten:
S Lower bracket bolts 1
S Cap bolts 2
S Upper bracket bolts 3
6-37
CHAS
3
)
30 Nm (3.0 mSkg)
23 Nm (2.3 mSkg)
20 Nm (2.0 mSkg)