Toyota RAV4 EE Owner's Manual page 98

88
OCCUPANT RESTRAINT SYSTEMS
1. SEAT POSITION, SEAT
ANGLE AND SEAT HEIGHT ADJUST-
ING SWITCH
Move the control switch in the desired
direction.
Releasing the switch will stop the seat at
that position.
Do not place anything under the front
seats, as this might interfere with the seat
movement.
2. SEATBACK ANGLE
SWITCH
Move the control switch in the desired
direction.
Releasing the switch will stop the seat-
back at that position.
CAUTION
Avoid reclining the
more than needed. The seat belts pro-
vide maximum protection in a frontal
or rear collision when the driver and
the front passenger are sitting up
straight and well back in the seats. If
you are reclined, the lap belt may
slide past your hips and apply re-
straint forces directly to the abdomen
or your neck may contact the shoul-
der belt. In the event of a frontal
collision, the more the seat is re-
clined, the greater the risk of death
or serious injury.
3. SEAT LUMBAR
ADJUSTING SWITCH
Push the control switch on either side.
The amount of lumbar support will change
while the switch is pushed.
RAV4_EE
—Active head restraints (on
some models)
CUSHION
ADJUSTING
Active head restraints are designed to
help reduce the risk of whiplash on the
seat occupant by moving slightly for-
ward and upward when the occupant's
lower
seatback during a rear−end collision.
seatback any
SUPPORT
back presses against
Finish
the