Toyota RAV4 EE Owner's Manual page 110

Table of Contents

Advertisement

100
OCCUPANT RESTRAINT SYSTEMS
Keep the belts clean and dry. If
D
they need cleaning, use a mild soap
solution or lukewarm water. Never
use bleach, dye, or abrasive clean-
ers, or allow them to come into
contact with the belts—they may
severely weaken the belts. (See
"Cleaning the interior" on page 490
in Section 5.)
Replace the belt assembly (includ-
D
ing bolts) if it has been used in a
severe impact. The entire assembly
should be replaced even if damage
is not obvious.
RAV4_EE
—Fastening front and rear
seat belts
Tab
Adjust the seat as needed and sit up
straight and well back in the seat. To
fasten your belt, pull it out of the re-
tractor and insert the tab into the
buckle.
You will hear a click when the tab locks
into the buckle.
The seat belt length automatically adjusts
to your size and the seat position.
The retractor will lock the belt during a
sudden stop or on impact. It also may
lock if you lean forward too quickly. A
slow, easy motion will allow the belt to
extend, and you can move around freely.
If the seat belt cannot be pulled out of the
retractor, firmly pull the belt and release
it. You will then be able to smoothly pull
the belt out of the retractor.
Finish
Buckle

Advertisement

Table of Contents
loading

Table of Contents