Toyota RAV4 EE Owner's Manual page 336

326
AUDIO AND HANDS−FREE PHONE SYSTEMS
(a) By Phone
1. Turn the "AUDIO/CONTROL" knob until
"By Phone" is displayed and push the
knob.
2. Turn the "AUDIO/CONTROL" knob until
"Confirm" is displayed and push the
knob.
After the system has received the name
and phone number, "XXX (name)" and
"XXX (number)" is displayed.
3. Turn the "AUDIO/CONTROL" knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
If "Confirm" is said, then input a voice
tag.
1. Push the talk switch and say the name
of the dial number that you want to
register.
2. Turn the "AUDIO/CONTROL" knob until
"Confirm" is displayed and push the
knob.
"Stored" is displayed.
3. Select one of the following:
Confirm
D
Speed Dial
D
Confirm
Turn the "AUDIO/CONTROL" knob until
"Confirm" is displayed and push the knob.
Speed Dial
1. Turn the "AUDIO/CONTROL" knob until
"Speed Dial" is displayed and push the
knob.
2. Push the desired preset button.
The system may not function in the follow-
ing cases:
If the phone book is full.
D
If the dial number has more than 24
D
digits.
RAV4_EE
(b) Call History
1. Turn the "AUDIO/CONTROL" knob until
"Call history" is displayed and push the
knob.
"Call History" is displayed.
2. Select one of the following:
Incoming
D
Outgoing
D
Incoming
1. Turn the "AUDIO/CONTROL" knob until
"Incoming" is displayed and push the
knob.
The incoming number is displayed.
2. Turn the "AUDIO/CONTROL" knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
For further details, see page 326.
Outgoing
1. Turn the "AUDIO/CONTROL" knob until
"Outgoing" is displayed and push the
knob.
The outgoing number is displayed.
2. Turn the "AUDIO/CONTROL" knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
For further details, see page 326.
(c) Manual Input
1. Turn the "AUDIO/CONTROL" knob until
"Manual Input" is displayed and push
the knob.
2. Turn the "AUDIO/CONTROL" knob to
select a number. Push the "AUDIO/
CONTROL" knob to set.
3. When the number is set, push the "AU-
DIO/CONTROL" knob.
Next, input a voice tag.
For further details, see page 326.
Finish