Toyota RAV4 EE Owner's Manual page 297

Switching over the Speed Automatic
Sound Levelizer (ASL) level
ASL: The Automatic Sound Levelizer can
be turned on by turning the knob. In addi-
tion, turning the knob allows you to select
from LOW, MID, and HIGH volume and
tone settings. The ASL system automati-
cally adjusts volume and tone in accor-
dance with the driving speed. This helps
ensure an optimal listening experience
even if noise levels rise while driving.
DISC·AUX (Compact Disc)
Push the "DISC·AUX" button to play a
compact disc. Each time you push this
button, the system changes between the
compact disc player and the changer of
separate unit if it is equipped.
When the audio is set into compact disc
operation, the display shows the track
number currently being played.
To switch between CD and AUX (external
device) modes, press the "DISC·AUX" but-
ton. The AUX mode is only available when
AUX port is connected to the system.
When the AUX port is in use, "AUX" will
appear on the display.
Error messages
If the player malfunctions, your audio sys-
tem will display following error messages.
"WAIT": The compact disc player unit
may be too hot. Allow the player to cool
down.
"ERROR 1": The disc may be dirty, dam-
aged or inserted incorrectly
down). Clean the disc and re−insert it.
"NO DISC": The compact disc changer of
separate unit is empty. Insert a disc.
"ERROR 3": There is a problem inside
the system. Eject the disc or magazine.
Set the disc or magazine again.
RAV4_EE
AUDIO AND HANDS−FREE PHONE SYSTEMS
"ERROR
authorized Toyota dealer or repairer, or
another
professional, to inspect.
"CD OPEN": The compact disc changer
lid of separate unit is open. Close the
compact disc changer lid.
If "NO MUSIC" appears on the display,
it indicates that a disc with no MP3/WMA
data has been inserted. Remove the disc
from the player and insert an MP3/WMA
data disc.
If the malfunction still exists, take your
vehicle to any authorized Toyota dealer or
repairer, or another duly qualified and
equipped professional.
 DISC 
With compact disc changer only—
Use these buttons to select the disc you
want to listen to.
Push "" (preset button 3) or "" (preset
button 4) until the number of the disc you
want to listen appears on the display.
TEXT
Compact disc player
This button is used to change the display
for the compact disc that contains text
data.
To change the display, quickly push and
release the "TEXT" button while the com-
pact disc is playing. The display changes
(up−side
in the order from the elapsed time to disc
title to track title, then back to the
elapsed time.
If this button is pushed while a compact
disc that does not contain text data is
playing, "NO TITLE" will appear on the
display.
If the entire disc or track title does not
appear on the display, push and hold the
button until you hear a beep. The rest of
the title will appear.
4": Over−current. Ask
duly qualified and equipped
Finish
287
any